Do you own a pair of timberland boots? Can You Wash Timberland Boots in the Washing Machine?
The short answer is no. Washing your Timberland boots in the washing machine may seem like an easy fix, but there are good reasons why you shouldn’t do it. Even if they’re water-resistant, there are too many angles at which water can seep into the boot and break down its structure.
If you have dirty Timberland boots that you want to clean, try washing them by hand instead of throwing them in the washer and dryer.
Keep reading to learn more about this common misconception and how to get your boots looking like new again without risking damage to the boots or your washing machine!
Can You Wash Timberland Boots in the Washing Machine?
Your waterproof boots will only be water-repellent when they’re brand new, so throwing them in your washing machine may seem promising.
But don’t. It is not safe.
Because the high temperatures and agitation of a can strip away all of your boot’s anti-water coating, which is supposed to block moisture from getting into fabric and leather.
After a wash, you’ll have boots that look clean but are pretty vulnerable to damage by rain or snow.
If you want clean Timberlands, just use warm water and soap and on top of that, try not to get them too dirty in the first place!
So How To Wash Timberland Boots In Washing Machine Safely?
If you want to be able to wear your favorite pair of Timberlands for years, washing them safely and correctly is key.
Like most boots, it’s not recommended that you wash your timberlands regularly.
To keep your boots looking nice as well as smelling fresh, clean them after each and every wear.
Here’s a step-by-step guide on washing your boot using a Washing machine:
- Turn your washing machine on and fill it with warm water. Don’t use hot water because it will cause shrinkage.
- Put a few drops of mild detergent into your boot. If you don’t have any, hand soap or dish soap will do fine. Be sure to avoid using too much detergent, as it can leave a residue that may attract dirt and other debris, damaging your boots over time.
- Place your boots into your washing machine and allow them to soak for about 10 minutes.
- Agitate your boots by rubbing them with a clean cloth or sponge. It will help to loosen any dirt or debris stuck inside of them. Be sure not to scrub too hard, as you don’t want to damage your boots by scrubbing off any of their paint or scuffing up their leather.
- Rinse your boots thoroughly. It will help ensure that all of your soap is removed from them. You can repeat steps 4 and 5 for a second time. However, be sure not to use too much detergent or scrub too hard, as it can cause damage to your boots over time.
- Allow your boots to air dry overnight before wearing them again.
Things To Remember While Washing Your Timberland Boots
Washing Timberland boots in the washing machine is not a wise idea. However, if the washing machine is your way, the following suggestions may save you a great deal.
- Always air dry your boots.
- Use mild soap, water, and a soft-bristled brush to wash.
- Place your boots inside a mesh bag for protection during washing.
- Let your boots air dry for at least 24 hours before wearing them again.
- It is not recommended to use a washing machine to clean your boots.
- Make sure you wash your boots with similar color clothes.
- Do not use bleach or fabric softener while washing your boots.
- If you have any doubts about whether or not to wash your boots, it is best to take them to a professional cleaner instead of risking damaging them yourself.
- To clean mud from your boots, use warm water and dish soap. Allow them to air-dry overnight before wearing them again.
- Do not put dirty boots on wet floors! They will be more likely to absorb moisture, leading to mold or mildew growth inside your shoes.
Now that you know how to wash Timberland Boots correctly, go ahead and wash those dirty-looking kicks!
How to Wash Timberland Boots without a Washing machine?
This boot is a sturdy, waterproof pair of boots made for daily wear. But no matter how tough these are, there will come a time when you need to wash them.
We will explain how to do it safely.
Before getting started, it’s best to remember that all leather is not created equal and, as such, you can wash different kinds in different ways.
It’s always best to follow instructions from your boot’s manufacturer before attempting anything on your own.
Step 1: Remove Laces
First, remove your laces, open up the boots and place them outside of your boots, so they don’t get caught on anything while being washed.
Also, if you’re washing other clothing with your boots, keep these away from any zippers or buttons.
Step 2: Cleaning with Soap and Wate
Many soaps contain harsh chemicals that can cause drying and cracking to your boots.
- Instead, wash them with gentle soap, warm water, and a stiff-bristled brush.
- Scrub away any dirt or mud you find on your boots’ surface.
- After scrubbing, fill up another large bucket with warm water and allow your boots to soak for about 10 minutes.
It will help loosen up any additional dirt or grime stuck on your boot’s exterior.
Step 3: Don’t Brush Them with a Wire Brush
While washing your boots, please don’t use a wire brush to clean them. Abrasive brushes can damage waterproof seals and affect their breathability.
Wash with warm water and use a non-abrasive sponge or cloth to wipe down. Use mild dish soap on caked mud, but make sure it doesn’t get too wet: oil and water don’t mix well!
Step 4: Air Dry
After washing your boots, you’ll still need to air dry them.
If you’re pressed for time and want to get those boots clean immediately, try using a blow dryer set on low heat.
It will help evaporate some of that water while drying out wet spots quickly.
However, let these puppies air dry again before wearing them out into public!
It may take a day or two for your boots to be completely dry, so plan accordingly.
What Are Other Methods Of Cleaning Timberland Boots?
Several other ways are there to clean your Timberland boots-
1. Hand Wash
This method is best for cleaning light-colored boots that you don’t want to fade from exposure to water or soap.
- Fill a tub with warm water and add a small amount of liquid detergent.
- Soak your boots for about an hour, then scrub them with a stiff brush to remove dirt and debris.
- Rinse your boots thoroughly, then let them air dry overnight before wearing them again.
2. Dishwasher
If you have a dishwasher, it can be used to clean your timberland boots.
- Add your boots to a load of dishes
- Run them through a normal cycle with no detergent or added heat drying.
This method is best for cleaning dark-colored boots that you don’t want to fade from exposure to water or soap.
3. Dry Cleaning
For leather boots, take them to a professional dry cleaner for cleaning and conditioning treatment.
4. Shoe Shine Kit and Wax Polish
You can use a shoe shine kit for leather boots to clean them.
- Use a soft cloth to apply polish to your boots
- Buff them with a soft cloth or brush until they’re shiny again.
This method is best for light-colored boots that you don’t want to fade from exposure to water or soap.
5. Waterproofing Spray
Use a waterproofing spray to protect your boots from water damage and stains.
This method is best for light-colored boots that you don’t want to fade from exposure to water or soap.
6. Leather Conditioner
For leather boots, use a leather conditioner to clean them, as it will keep them soft and supple while also protecting them from wear and tear caused by water or other liquids.
FAQs:
- Is it safe to put boots in washing machine?
The short answer is no. You should not wash your boots in a washing machine. However, if they are really dirty and you can’t find any other way, you can try a washing machine. Just keep in mind that they don’t get ruined.
- How can I clean my Timberlands without ruining them?
You can proceed by hand method. It won.t ruin your favorite timberland shoes.
- What can you clean Timberland boots with?
You don’t have to worry when they’re covered in mud, grease, or gunk. You can clean your waterproof boots with anything. However, if you want to clean them regularly, make sure you use something that won’t damage your boots.
Bottom Line
To wash or not to wash, that is a question. So, can you wash Timberlands in the washing machine?
They’re made of waterproof leather that can withstand water for only so long before it begins to degrade and look ratty.
It’s best to treat them like any other pair of shoes and give them a good wipe down with a damp cloth when they get dirty.
If you want to wash them, don’t put them in a washing machine; take them to a cobbler instead.
This way, they can ensure they are properly cleaned while also ensuring that they don’t come out looking all warped from being jammed into too small of an area inside your washer.
